Fitting Cat Flap In UPVC Door Panel

Cat flaps let your cat go in and out whenever they want without having to let them in or out. They can also help prevent your cat from urinating inside the home.

It is much easier to put an animal flap on a upvc panel than on a glass one however, you'll require some knowledge and right tools.

Take a look at the Door

Fitting a cat flap cover for winter flap in the door can be a challenge but as long as you choose the right type of cat flap be patient and follow the instructions provided it shouldn't be too difficult. We will demonstrate how to draw the shape using the jigsaw to cut the door's opening. Then, we'll finish the job by attaching the flap. This will ensure that the flap is in place and shields the doors from the damage caused by wind and rain.

To determine the size of the cat flap you require, measure the width of your pet. This will let you choose a cat flap that is large enough to allow your pet to walk into the house and leave without having to open the door each time.

If your kit has an illustration of where to drill, then put it on the door, and then draw a pencil around it. If your door has a sill or moulding along the bottom edge of it ensure that you have clearance from these because this will ensure your cat Flap In upvc door panel's safety and stop them from gaining access to your home.

Utilize a set square to make sure you're cutting properly and to make sure the hole is in a rectangle shape. Once you are happy with this, you can begin to remove the rest of the door material. If you have a square that you have cut, use it to ensure whether you're cutting in the right way and to make sure the hole is in a rectangle. Once you are satisfied with the shape, you can begin to take off the remaining door material.

Draw a Line

The cat flap installer flap lets you to let your pet in and outside without worrying about unwanted visitors or unwelcome gifts. It also stops draughts and helps keep the temperature in your home stable. Installing a cat flap on your door can be a daunting task to those who haven't done it before. A lot of people will hire an expert joiner or carpenter to do the work. While this is certainly an option, it's possible to do the work yourself if you own the appropriate tools and follow the instructions with care.

This is much easier to do with doors made of wood, however it is still possible using uPVC. However you should be cautious not to scratch the doors since this could cause the door to be damaged and invalidate your warranty. The first step is to measure the door to ensure it will accommodate the new cat-flap. If you have an ordinary uPVC panel, this should be easy. However when your door is composite or another type of door, you may need to be more careful.

Next, you will need to determine the belly height of your cat. This is the distance from the floor to the bottom of the cat's stomach and you will need to find a place on the door where this measurement will fall within the range that your cat can comfortably pass through. Once you've got the information, you'll need to mark the area with a spirit level and a pencil so that you know the hole will fit your cat.

Once you've marked the area, it's time to make the hole. It is important to take your time and use a jigsaw in order to ensure that the cuts are clean and smooth not uneven and rough. This could cause damage to your door. Wear safety glasses and a dust mask when using the jigsaw. Inhaling sawdust is dangerous for your health. Once you've finished cutting the hole, you will require sandpaper for smoothing the edges so that the cat flap can be easily inserted into the hole.

Cut a Hole

Getting a cat flap fitted to an existing door panel or double glazing sealed unit can be quite difficult. It is tempting to do it yourself, but unless have experience in DIY it is recommended to hire a professional in to do the task for you. A botched job could not only be ugly and unattractive, but could also be a security threat. It could let cold air in when the cat is outside and hot air out when it is inside.

The first thing you need to do is draw the position of the hole in the door with a pencil and a spirit level, this will ensure that it is correctly located and is in a straight line with the other parts of the door. It is important to have a piece of sandpaper at hand to smooth out any rough edges.

After the line is marked you should cut out the hole using a jigsaw. Be sure to wear the appropriate safety equipment when working with the power tool. If you are worried about the sound of a jigsaw you can buy one that is cordless, which is quieter and more user-friendly to use.

It is important that you only remove the material that is required for the fitment of the cat flap. A little bit of extra material will be needed to cover the thickness of the wall of the flap but removing more than that can cause problems or damage the doors frame.

A door made of upvc could have a metal frame or a panel inside that will interfere with the microchip cat flap, and if this is the case, you'll need to cut an oversize hole to ensure the metal does not come into contact with the the cat flap. If this is the case, it is important to fill in the gap and seal it with water.

If you are fitting a cat flap into an upvc door or a double glazed window cat flap with a frame made of metal, you'll need to talk to a specialist who can provide you with a brand new pane of glass with the hole for the cat flap in it. This is less expensive than fitting a cat flap in an existing pane of glass that was not designed specifically for this purpose.

Fit the Flap

Cat flaps let your pet leave and come whenever they want, allowing them the ability to unwind inside the house whenever they want to. However, if you own a uPVC door, it may be difficult to install a cat flap, especially in the absence of glass panes that can be cut for one. If you're willing to install a half-glazed uPVC replacement panel, it is possible to add a cat flap. It's not as simple as simply cutting a hole in the door though and there are some things you'll need first to ensure it's safe.

A composite, uPVC, or GRP door panel usually has an flimsy plastic outer layer bonded to a soft polystyrene insulating core. The material is fairly fragile and care should be taken when cutting through it to avoid damaging. This type door has a template you can use to make the hole.

Once you have marked the location of the hole in your door, it's now time to install the flap itself. You can buy and fit various models including basic button operated ones to microchip activated units that allow only your pet. Whatever type of cat flaps you select, it's vital that your cat is able to utilize the flap with ease without getting caught in the rain.

A circular fitting is better than a square because circles can be cut more securely into the glass. It's because square holes are more likely to crack the glass when drilled. It's also a safer option as you're not putting yourself at risk by having to drill into toughened glass that might break and injure your pet or family members. This is particularly important if there are elderly or children in your home that could be hurt by glass shards.