Fitting A Cat Flap In A UPVC Door
The freedom to let your cat move around the house whenever it wants is a great method to keep your pet physically active and mentally engaged. Having a flap can also aid in reducing toilet accidents by making it easier for your cat to leave the house whenever it wants to.
Take a measurement of the door
A cat flap allows your pet to go and come at their own pace, without having to open the door for them. This makes it ideal to keep them inside the home when you're away and helps to keep unwanted pests out of the home as well!
It is important to measure the door to ensure you get the right size cat flap. There are many sizes available. This ensures you get the correct size to fit inside your door made of upvc, otherwise, it could be too small or large and your cat will have trouble using it.
Before doing anything but use a ruler to determine the length of the door in various places along its edge. Also, you should measure the height of the door in a few spots. This is because doors that are too high could cause your cat to perform the gymnast's routine each time they use the flap!
If you're unsure of how to measure the door, it could be best to seek assistance from a glazier or someone who does this type of work frequently. They can determine whether your door is suitable for cat flaps, and will give you advice on the right size flap to purchase.
Mark out the shape of your hole on the door after you have taken the measurements. This will assist you when cutting the hole and save you money!
Make sure that you put the hole in the correct position. For instance, if you're installing the cat flap inside a patio door, you must ensure that the hole is not too close to any hinges, as this can cause leakage and issues with the seal.
If you have an opening made of glass you could want to leave this task to a glazier. It isn't easy to fit a cat-flap into an existing pane. You may also find that it breaks and loses its weatherproof seal.
Measure the Cat
A cat flap permits your pet to go and come as they please without you having to leave them alone. It also stops draughts from entering your home, which isn't good for you or your cat.
If you do have a uPVC or composite door, it may be difficult to install a cat flap. These kinds of doors are often made with different materials than traditional wooden or uPVC doors and the process of installing them is quite different too. Be sure to check with the manufacturer if the door is compatible before installing the cat flap on your uPVC composite or uPVC door. Modifications can invalidate warranties.
They are designed to be tough and durable and have insulation. This makes them more resistant to the elements of weather than other doors, but they may be difficult to install a cat flap into. If you're unsure about whether your uPVC or composite door will accommodate the cat flap, make sure you consult with a professional joiner prior to beginning.
To make sure that your cat can pass through the door, you'll need determine their height. It is easiest to measure their height when they are calm or asleep, so that they don't sway around. Once you have their height, you can measure the distance between their stomachs and the floor to determine the position of the flap's bottom. This location can be outlined on the door.
If your composite or uPVC door is made of metal (either steel or aluminium), you'll need to be very careful when cutting it using power tools. The drilling process can make cracks, particularly if the area is composed of toughened glass. It is recommended to hire an expert glass installer when putting in a cat flap in a pane. This will stop the glass from becoming fragile or shattering. A Glazier will also be capable of providing you with a cat flap that is less likely to break and safer for your cat to use.
Cut the Hole
If not, you can make one yourself using fitting a cat flap in a upvc door sheet of paper (tracing paper is the best choice). If it doesn't, you can make one using the thin paper (tracing paper is the best choice). After the shape is drawn in pencil on the door, you can then use a spirit level to make sure that the design is horizontal. This will ensure that your cat flap sits properly in the opening, and it will not slide open or close.
Next, use your jigsaw to cut out the design that is on the door. Make sure you are using a blade that is suitable for use on uPVC doors. Usually, it will be marked accordingly, if not ask the staff at your DIY store for advice. Once the hole is made and the flap is placed against it and then open it to ensure that the flap is moving smoothly. If it binds at any point, use a filer or a rasp to remove it.
Also, make sure whether there are no electrical gas or cable lines within the door you'll be cutting into as they could be damaged by your jigsaw. Be aware of any handles, or other fixtures in the door, which will need to be removed to fit the cat flap. Be cautious not to cause damage to these items during the process.
Most people who install the cat flap themselves have a standard solid uPVC door and so will not be dealing with any of these issues. If your door is made of wood or has a decorative piece that cannot be removed, this can make the task.
It is always worth seeking expert help from a cat flap fitter when it comes to these types of jobs since it is crucial to get the job done correctly to avoid potential problems in the future. It is crucial to do it right because getting it wrong could damage the door and void the warranty.
Install the Flap
Once you have cut your hole, place the flap and check whether it opens and fits well. If you find any points that stick or catch or stick, use a hand-file or sandpaper to file them down until they fit properly and open without any problems. Make sure that the flap is in Fitting a cat flap in a upvc Door flush position with the door.
Some kits come with templates for this, but even if yours doesn't have a template, you can use a piece or thin paper instead, something similar to tracing paper. Place the paper on the door, and draw a line to show the location where the flap is placed (this will serve as your cutting guide). Draw four screw holes on each corner of the flap with the pencil marks you made on the door. These will be the screw holes will be used to secure it in place.
Most uPVC doors are strong and therefore easy to cut into. However, if the door is made from GRP or a composite then this may be more difficult. If you're not experienced in this area, it might be wise to get a professional to handle the job for you. They will also be able to advise you on whether or not your door is suitable for cat flap installation.
It is possible to install a cat flap into composite doors. However, it's essential to consult with the manufacturer or a professional joiner prior to making any changes since any modifications to these doors may invalidate the warranty. If you decide to complete the work yourself, bear in mind that it could be messy and may even be hazardous.
For composite doors, you'll usually need to use fitting a cat flap saw or grinder to cut through the door's panel rather than just through the GRP. Be aware that this can be extremely dangerous work and you'll need to take extreme care not to hurt the door or yourself since it is extremely fragile. It is important to note that it is much more difficult to create a hole in a door glass than it is for a uPVC door or a solid wood doors.