Ten Things You Should Not Share On Twitter
How to Change a subaru smart key (click here for more info) Spare Key
If you've lost your Subaru car key, call a locksmith. Locksmiths will usually cut you a key cheaper than the dealer.
Subaru car keys are generally either intelligent "push-to-start" fob remote keys or simple keys made of metal. The Fob key has an embedded chip and requires reprogramming.
Keyless Entry System
The key fob can be used to lock and unlock your Subaru remotely. It also opens the trunk of your car or the lift gate. The remotes use an inside keypad to connect with your computer system of your vehicle.
Certain models of Subaru offer a less-known feature called PIN Code Access. You can make a custom number sequence to start and open your vehicle. Check your owner's guide to learn how much does it cost to replace a subaru key to utilize this feature if you have a Subaru Forester, Outback Crosstrek, WRX STI or Impreza.
It's likely that the battery inside the key fob is dying. You can test the battery life of your key fob using the portable tester or multimeter in your garage.
The next step is to take the key fob out of its case, and then examine the circuit board that controls the transmitter. You'll be able to see one or two sets of 8 numbers. Note down the first set so you can remember it. After you've completed this, you can start programming the key fob at home. The process for doing this differs based on the make and year of your vehicle but it's usually easy enough to accomplish yourself.
Key Fobs
Subaru's latest models have key fobs that not only unlock doors but also turn on lights, lock the gas cap and even start the car. This feature is especially helpful if you've found yourself at the gas station and your car wouldn't even start because the battery in the key fob has died.
It is likely that your Subaru's key fob, regardless of whether it's brand new or old can be replaced easily. It's important that you remember that more recent models with a high level of technological sophistication could require an outing to the dealer. However, with a little time and effort, you'll have your replacement key fob ready to go at home.
Begin by looking at the circuit board that controls the transmitter on your key fob (instructions to open the case are provided in your owner's manual). It should contain one or two sets of serial numbers each of which is 8 digits long. Keep the first series of numbers handy for later reference.
Then, sit in your driver's seat and shut all doors. Turn the key to start the vehicle before turning it off after ten turns. Press the lock button of your key fob, and then open the door. This will confirm whether your doors are operating properly. After that close the door and take the key out of the ignition. The chime should be heard from your car, signalling that the key fob is programmed.
Ignition System
If your Subaru keys aren't working as they ought to it could be due to the fact that the battery is dead. If you know how, you could replace the battery of your key fob yourself. A replacement battery is cheap and relatively easy to locate. If your key fob doesn't respond to your commands, there might be another issue. To get a spare key, you should go to a dealer. They will make sure that the key is genuine Subaru key, which is covered under warranty, and is programmed to your vehicle. This is much simpler and safer than getting an aftermarket key from a website.
You can also request that the dealer cut a new key if you provide them with your VIN and proof of ownership. They'll use this information to program the replacement key to ensure that it will be accepted by the immobilizer. This process is more complex than simply cutting a key, and the dealer will generally charge a higher price for this service.
Once the new key has been programmed and you're able to switch it to your current key. It takes only five seconds to insert the new key, so be sure to keep your working key at hand. You can remove the key after the security light has stopped flashing and you can test it.
Battery Replacement
Subaru fobs are extremely useful since they can switch on the sunroof and power windows of your vehicle with a single button press. The battery in your subaru key cutting fob isn't designed to last forever, and it will need to be replaced at some point. This short guide from Capitol subaru legacy replacement key cost will help you to replace the battery on your own.
You'll need to locate the small crack that divides the front from the back of your keyfob. With a small flathead screwdriver, you'll be able to pop the seam to reveal a small compartment that houses the battery. Remove the old battery, and then put in a new one, making sure that it is facing the right side up. Once everything is reassembled and in place, you can use your new key fob to lock, unlock, and start your vehicle effortlessly!
You should always have a spare set keys, especially if yours is broken or has been lost subaru keys. You can purchase a replacement key at your local dealership or get it cut by locksmiths. Whatever you choose, it's essential to get your key fob operating properly as soon as possible to ensure you drive in a safe manner!