Guide To Ghost 2 Immobiliser Installation: The Intermediate Guide To Ghost 2 Immobiliser Installation

From VSt Wiki
Revision as of 23:34, 2 September 2024 by TravisDown2220 (talk | contribs) (Created page with "Autowatch Ghost II Immobiliser Installation<br><br>Ghost immobilisers are among the most advanced features in vehicle security. They are a breakthrough in the way they safeguard your vehicle from hacking, key-cloning and even wheel jacking.<br><br>The system uses a unique disarm sequence, which requires the correct PIN code to start your vehicle. This is accomplished by pressing the buttons of your steering wheel or dashboard.<br><br>TASSA Approved<br><br>The new TASSA v...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Autowatch Ghost II Immobiliser Installation

Ghost immobilisers are among the most advanced features in vehicle security. They are a breakthrough in the way they safeguard your vehicle from hacking, key-cloning and even wheel jacking.

The system uses a unique disarm sequence, which requires the correct PIN code to start your vehicle. This is accomplished by pressing the buttons of your steering wheel or dashboard.

TASSA Approved

The new TASSA verified Ghost-II CAN immobiliser from Autowatch is a groundbreaking device created to fight recent crime trends, including key cloning and hacking. This smart system connects directly to the onboard CAN network of your vehicle, preventing it from being turned on or driven if you don't have the correct code. The system is completely undetectable and does not make use of radio frequencies or key fobs. Instead, it allows you to create your own unique sequence of PINs using buttons on your dashboard or steering wheel, which you are able to modify at any time. The PIN can be as long as up to 20 times long for maximum security. A secure emergency code is also available.

The system works by communicating with the vehicles CAN data network to determine the moment a particular PIN has been entered, this is then sent to the vehicle, which disables engine and ignition and shuts down crucial components such as the starter motor and fuel pump. The system features a "valet' mode which allows you to disable it to prevent valets or staff from driving your vehicle without the correct key.

Contrary to conventional immobiliser relays that can be deactivated using readily available diagnostic tools for professionals and tools, the Ghost device relies on the onboard data network to communicate with the ECU and is not able to be tampered with. It's a sealed device and therefore, it is impossible to monitor the circuits. This makes it nearly impossible for thieves to hear the distinctive clicking sound that traditional immobiliser relays produce.

This technology is not vulnerable to jamming devices utilized by high-tech thieves, and because it is based on the CAN data network, it's undetectable to any other diagnostic tools. This makes it a great anti-theft tool for any modern vehicle.

We'll visit your home or office to perform the installation once you've scheduled it. We'll go through a complete demonstration with you and will then provide you with an owner manual and an emergency card, two Autowatch window stickers and an installation certificate.

Insurance Approved

The Ghost is a security device that is installed aftermarket and protects you from the types of thieves interested in stealing a vehicle. It works by preventing your engine from starting until a specific sequence of buttons is activated. This sequence is only recognized by you, therefore when your car is stolen thieves, they won't be able to start it and will likely leave your vehicle for fear of being caught. The ghost has a'silent' mode that disables the vehicle when it is not being used. It can be shut off by pressing the button.

The system is fully TASSA (Tracker and Aftermarket security systems association) insurance-approved, which means it will be recognized by some insurance companies as an additional security measure on your vehicle. It can be used alongside other Thatcham approved security measures like trackers to prevent your car from being stolen and also gives you security.

The system also communicates with the ECU of your vehicle through the CAN data loop, which is inaudible to diagnostic tools. The Ghost cannot be bypassed by a criminal simply by inserting a new key to the vehicle or replacing the ECU. The system will only begin to start your car by entering the correct pin code. This unique pin code is only known to you and can be changed at anytime.

The bmw x6 ghost installer is an immobiliser that can be fitted to any vehicle without the requirement for additional key fobs or wiring. It is directly connected to the vehicle's CAN data network, and a PIN number is programed using the buttons on the dashboard or steering wheel. This code will stop the vehicle from starting until the correct sequence has been selected first. If the code is misinterpreted, there are secure emergency codes that can be reset with your mobile phone. There is an application that can be used on iOS and Android to reduce the need to enter pins each time, thereby providing greater security.

Discreet

An immobiliser system, in contrast to a GPS tracker, which only aids you find your car after it's been taken away, can stop the vehicle from ever being stolen in the first instance. This is done by preventing the engine from starting unless it is able to receive the correct code through the key fob or a smartphone application downloaded to it. This is a great way how to install a ghost immobiliser stop wheel-jacking and other forms of theft because the person who is stealing is forced to leave the car alone or risk being caught.

The ghost 2 immobiliser installation immobiliser is a weatherproof tiny device that is fitted into the wiring harness inside your vehicle. It connects to the CAN data network, and is hidden so thieves can't detect it or disable it by simple wire cutting. It also has the option of a service mode that can be turned on to allow garages to work on your vehicle without needing to know the passcode in order for it to start.

Once you have the device installed in your vehicle it will be able to arm and disarm it from your smartphone using its dedicated application. You can alter the PIN code whenever you want to ensure that you're the only one who has access to your vehicle. This is useful in case you intend to sell your car in the future as it can increase its resale value.

Another advantage of the Ghost immobiliser is that it's discrete and leaves no marks on your internal body of your vehicle, making it an ideal option for any vehicle. It's easy to fit it, is silent and won't interfere with any other systems in your car.

An immobiliser that is discreet will improve the appearance and feel of your car. This is particularly attractive for those who frequently utilize their vehicles to transport valuable items, because it can help deter any potential thieves from pursuing them. The ghost immobiliser works alongside other anti-theft systems like trackers to provide unrivalled security for your vehicle.

Low Maintenance

A Ghost immobiliser connects directly to the CAN data network. It is almost undetectable as it doesn't have any LED indicators or other key fobs. It doesn't emit radio signals, and is quiet so that thieves can't detect it working. This device can be placed in a variety of places (even under floor mats), and is a great option for those looking to protect their vehicle without sacrificing its aesthetics.

This device prevents you from starting your car until you have a unique password. This is done using a combination of buttons on your dashboard and steering wheel in a particular sequence. This will prevent hackers from cloning or hacking into your system and stop them from starting the vehicle.

The Ghost will detect this attempt to increase the signal and stop your car from starting until the proper disarming code is entered. The audi rs6 ghost installer is unlike other security systems that can be activated by entering the wrong code. It will continue to prevent your vehicle from starting until you enter the correct passcode.

The Ghost remains in service mode until you switch it back into 'service' which is activated by pressing the same button combination that you did to arm it (this can be done when you go to your dealer for maintenance or warranty work). This is to ensure that it's not removed by unauthorised people and it is then rearmed and brought back to service mode when needed.

It is also possible to transfer your ghost installations to a new vehicle if you move during the course of ownership, if the new vehicle is compatible with. The latest version of Ghost also comes with QR finger print stickers that are linked to the International Security Register, meaning that in the event that your Ghost is ever taken for parts, it can be traced back to you and your vehicle. This will deter criminals from stealing cars fitted with ghost installers near me because they be aware that the vehicle is secure and they could risk getting caught and arrested.