Guide To Upvc Window Replacement Hinges: The Intermediate Guide The Steps To Upvc Window Replacement Hinges

Choosing Upvc Window Replacement Hinges

Choosing and fitting upvc window replacement hinges (listen to this podcast) isn't as complicated as you might imagine. It is important to check the arrow on the hinges are facing the right way and also the thickness (13mm or 17mm) of the hinge arm on the open frame.

There are a variety of different kinds of hinges, each having their own unique features. This article will discuss the most commonly used types of uPVC window hinges, and their benefits.

Egress/Easy Clean Hinge

They are a great choice for replacing or upgrading windows for fire escapes since they are able to open at a 90-degree angle. They can also be lowered to an easy clean position to allow you to easily reach the outside of windows to clean them without climbing on a ladder or lean over at potentially dangerous angles.

Yale is among the most reputable and well-known brands in the home security industry. They can be used with all types of uPVC side-hung windows. By pressing a small button the window sash is slid to the side and into the clean position. Once closed, the sash will automatically return to its original position.

They are available in both 13mm and 17mm stack heights. Depending on the size of your window, we recommend using our Egress Selection Guide to determine the best product for you.

These hinges are compatible with conventional side-hung frames made of aluminium or uPVC. The friction screw is used to adjust the resistance. This makes it easier to open the window door repairs locks glass hinges and reduces the risk of an accidental closure in severe winds. They have been tested for more than 30,000 cycles, and comply with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.

The Nico Egress Easy Clean friction hinge is easy to operate and has no buttons or catch. It offers a convenient and secure solution for emergency exits and cleaning. Press the hinge retention clip located on the inside of the bottom corner. This will open both the bottom and top catches and allow you to slide the sash to the easy-cleaning position. Once you are in the clean position, close the window to reset the hinges to their original position.

Fire-Escape Hinge

Fire Escape Hinges commonly referred to as "Easy Clean" hinges are used to replace side-opening windows to allow escape (fire safety) reasons. These hinges allow for a larger opening in the event of a fire. This type of hinge is legal in any room with a window according to building regulations.

The windows have an elongated friction that permits them to open at a 90-degree angle. They also allow the opening sash slide across the glass when it's opened and allows for easy cleaning without the need to climb ladders. The hinges have no fiddly buttons or catches, and are operated with an easy, secure lever that can be accessed from the inside of the home.

The hinges, which are manufactured in the UK by Cotswold are fitted with the safety of children in daily use. This can be removed using an invisible button. You will have peace of mind knowing that your children will not accidentally open the doors too far. They are available in 13mm or 17mm stack heights.

To order these hinges simply take a measurement of the length of your current side hung window hinge that attaches to the frame (see the article on measuring the length of your window hinge repair near me hinges made of upvc). Choose the right size hinge from the list below.

Please note that the measurement is taken from the part that fixes to the frame and not the sash, the actual hinge length may be slightly shorter or larger based on the manufacture of your old windows. When deciding on the width of the hinge, most upvc frames will fit the 13mm stack height however if your original window frame measures 17mm, choose this option. Alternately, you can install the 4mm packer to make up the difference. The hinges are available in two different directions (1 left and one right). The hinges do not come with screws. They can be purchased separately if required. Our upvc window repair screws are highly recommended. They are specially designed to enhance the performance of your hinges that allow them to run efficiently for a longer. They feature a less friction design and a better weather seal that is fitted with a new nylon reducer end cap.

Restricted Hinge

There are instances when a window needs to completely open, and this can be a challenge using hinges that are standard. The restricted child safety friction hinges can help overcome this issue and offer a fantastic solution when ventilation is needed but access to clean up or escape in the case of fire isn't possible. They function by limiting the amount the sash can open and allow the override of this restriction with an option. They are suitable for both top and side hung windows and are available in 13mm and 17mm stack heights.

The Nico Restricted Egress Hinges combine the benefits of a standard restrictor, and an escape pivot to provide a simple but efficient method of complying with building regulations. It is suitable for both side hung and top opening uPVC windows and comes in 17mm and 13mm stack heights. It comes in two pieces with one hinge being the one with restricted egress and the other being the unrestricted. This allows one to be installed at the bottom while the other is installed at the top.

These uPVC hinges are specifically designed to be used on windows that aren't able to be fully opened, like the bedroom of a child. The mechanism limits how far the sash opens up to 100mm in a safe distance, and re-engages once the window is closed.

Like the other types of uPVC friction hinges, these can be used on all styles of windows and are ideal for those hard to reach windows above the ground level, three-storey flats or windows that normally require a ladder for access to them. They can be improved by our security enhancements, like hinge guards and protection plates for the hinge or dog bolts, to achieve PAS 24 performance.

It is essential to measure the hinges on your window to ensure that you get replacements that are the same size. The easiest way to accomplish this is by looking at the hinge in the gallery and determining the location you would like it to be positioned. The top hung hinges can only be put on one side, whereas the side hung ones can only be positioned on one side.

Standard Hinge

Standard hinges have metal-to-metal contacts and don't require additional parts to help reduce friction. It is available in a variety of finishes and also comes with an NFPA-certified fire rating. For a quick way to determine the radius of your hinge, lay it flat and align with a quarter and dime in two corners. If the quarter fits better then the corner should be rounded to 5/8 inches.

Selecting the right hinge can determine the success or failure of the appearance of your door. It's crucial to match the finish and style of your fix loose door hinge with the hinges to create a unified look that's both functional and visually appealing.