Why Subaru Car Keys Still Matters In 2023

how to get a new subaru key fob to Programming a Subaru Key Fob at Home

You may need the key fob to be programmed by an auto locksmith or Subaru dealer, based on the age of your Subaru is. This is usually accomplished by connecting a programming machine to the car's computer.

To program your Subaru, start by unlocking the driver's door with the door button control, then close it. You will hear a chime on the instrument panel, and the dome lights will flash.

Step 1: Find the Transmitter Circuit Board

There are many ways to program your keyfob. First, you should know which kind of key fob you own. This can be done by inspecting the key fob's shape or by listening to the car for a sound.

Once you have the information and have it, you can begin the process of programming your keyfob from home. To do this, you will require a metal key and a flathead screwdriver. The key fob can be opened by twisting. The key is inserted into the case. Then let go of the battery by pressing the tabs holding it in place. Replace the battery and then put the case back together.

Step 2: Unscrew the Key Fob Case

It is a good idea to replace the battery in key fobs when they're not functioning. In some cases, the buttons on the key fob might be damaged. If you see that the contacts made of metal on the button have come loose Try soldering them into place again to make them work again.

Before you start the process, ensure your vehicle's doors are closed and the ignition is off. You can do this by closing your driver's door and pressing your door button ten times in rapid intervals. Then, you should hear the instrument panel chime, and the dome lights will light up. This indicates that you're ready to move on.

Step 3. Insert the key fob into the ignition

There are lots of articles online that will give you the steps to program a new or replacement Subaru key fob at home, but most of them are not very specific. Reprogramming a key that is electronic is best done by an expert auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your Subaru with the engine off and all doors shut. You can open the door button control and use it to unlock all doors. Open and close the driver's doors two more times. Then, remove the key from the ignition switch (don't turn it) 10 times within 40 seconds. The system will chirp to confirm that the settings have been changed.

Step 4 Step 4: Switch on the ignition

Before you begin this process of key fob programming, it is important to note that this method only works if you own one working key already. If you don't then a dealer or auto locksmith will be required to program a new key for your Subaru in Fort Bliss.

After the key is programmed, it should be capable of starting your vehicle within five seconds. Begin by closing all doors and turning off the engine. Next, get in the driver's seat, and then unlock all doors using the door button control. Place the key into the ignition then turn it on to the off position (the electrical systems will come on, but the engine is off), and then back to the off position ten times in rapid succession.

Step 5 5. Unlock the driver's Door

Subaru offers a wide range of luxury automobiles with key fobs that lock and unlock doors, start the engine, and even defrost windows. These devices may stop working.

To fix this problem to fix it, you must contact a locksmith or a dealer. This will fix the problem and ensure that your vehicle is secure.

To do this, open the door to the driver's side and close it. Place the key in the ignition and turn it until it is in position 1. Then, return it to the off position. Repeat this ten times the row as fast as you can. After ten times you should hear a sound.

Step 6: Press the Lock/Unlock button on the Driver's Door

If you are looking to replace the battery on a subaru chip key replacement key fob, the procedure is easy. First, open the exterior fob casing. Utilize a flathead tool to pry the interior case open and take out the batteries that were in there.

After removing the battery, put in the new one and close the case. Then, you can sit in the driver's seat, and unlock all doors using the door button control. After that, put the key in the ignition and turn it so that the electrical systems are on, but the engine is off. Repeat this 10 times in succession until you hear the chime coming from the instrument panel. This will put the system in programming mode.

Step 7: Press on the Passenger Door Lock/Unlock button

The irritating chirp that can be heard when locking or unlocking the subaru car keys Key Fob from outside of the vehicle can be a distraction for certain owners. In some cases you can deactivate the chirp by opening and shutting all doors while double-clicking lock button on your key fob.

Close all doors including the fuel-filler lid and switch off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. Once this is completed the instrument panel will emit an audible chime. The chime signals that the lid of the fuel-filler door are locked. It is possible to change the setting to make the doors lock automatically without having to push a switch.

Step 8 Step 8: Enter the 8-Digit Transmitter Number

Keep the first 8-digits in your head. Then, get into your driver's chair, close all of the doors, and then turn the key back to the first position (towards towards). After 10 turns, your panel will chime once.

The transmitter circuit board is in the key fob's case. The circuit board will have one or two 8-digit numbers. Follow the steps in the guide to register the code. For older models, this process may require a visit to the dealer.