"Ask Me Anything": Ten Responses To Your Questions About Upvc Window Handle Replacement

UPVC window handles replacement Handle Replacement glass In windows

It is easy to replace a broken window handle with the right tools. However, it is essential to know your type of handle and the spindle's length prior buying the glass replacement for windows.

Older uPVC windows feature handles with cockspurs, which have an extension spur that can the lock of a wedge cockspur striker plate. These can be left- or right-handed and must match when replaced.

What type of lock or handle do I have?

There are a variety of upvc window handles and locks, each with its own benefits and purposes. The type of handle you are using will determine how easy it is to open your windows and if the locking mechanism functions according to the plan. Over time, and with regular use the handles made of upvc on your windows can be damaged and worn out. This makes them less secure and effective. In some cases they may even fall completely off. If you find that your window handles have fallen off, it is important to repair them as quickly as possible. This will prevent possible break-ins and will keep your home secure.

It's a simple job that virtually anyone can perform. With just a few tools and the proper knowledge, this is a simple procedure that shouldn't take more than a couple minutes. You must know the type of handle or lock that you have on your window. This will allow you to choose the correct replacement sash windows.

Inline Espagnolette Handles

They are typically located on the outside of the window. They are flat in design and feature an opening that is connected to the locking mechanism on the frame of the window when it is turned. Inline upvc handles also have a spindle that runs through the centre of the handle, and into the frame of the window to operate the latch.

Cockspur Handles

These handles are typically found on older uPVC windows and feature distinct hook-shaped designs. Cockspur handles are secured to the window frame by one screw, and are less secure than other types of window handles.

Handles that tilt and turn

As opposed to the other handles made of upvc, tilt and turn handles can both be rotated to open the window, and turned inwards to allow to let air flow in. They have a 7mm spindle at the back and are available both in left and right-handed versions.

It is important to measure the spindle size when buying double glazed replacement windows handles made of upvc. Not all of them are the exact same size. Drop something in the middle of the hole to check the length. This is the maximum spindle length that will fit your window.

What is the spindle?

uPVC window handles work similar to doors, by turning the handle to activate an opening inside the frame. The latch opens the window, so it can be shut and opened. The handles can become damaged, especially if they're frequently used or exposed to harsh environments. This can lead to the need to replace your uPVC handles on windows since they may not be able to operate the window properly in the future.

There are several different types of uPVC handles to choose from, including Espag, Cockspur and Spaded handle options. They are made in a variety of ways to fit into uPVC frames. Each handle type uses an individual spindle to lock the window screen replacement mechanism. It is important to identify the kind of handle that is installed on your uPVC windows so that you can replace it with the correct one.

The base section of the handle will inform you what kind of uPVC it is. There should be a'snap in' cover over one screw that holds the handle's base in the correct position. When you remove this cover and you'll be able to see the second screw that holds the handle base in position. After both screws have been removed, you should be capable of pulling the handle away from the uPVC window.

Once you have removed your uPVC window handle, you have to carefully unscrew the spindle you have removed from the locking mechanism. Take note of the length of the spindle. You will need to purchase a new one that is the same length as the original handle and the locking device.

The spindle wears out and becomes inoperable with the locking mechanism. This could be due to damage from constant use or a loosening of the locking mechanism, or even corrosion over time. If this happens, it is necessary to replace the window handle and locking mechanism to restore full functionality to your uPVC windows.

How do I get rid of the handle from the previous one?

Through time and regular usage, window handles could become damaged or broken, and if this happens, it is important to repair them as quickly as possible to ensure the security of your home. It is good to know that replacing a worn or damaged handle is a simple task that can be accomplished in less than a minute and doesn't require any specialist tools.

To remove the handle, you first need to remove the screw at the base of the handle. Once the screw is removed, the handle will be pulled away. There is another screw located at the bottom of the handle's base, and it is able to be removed as well. Once the two screws are removed, the handle can be detached from the window's base.

After removing the handle and align the fixing holes of the new handle with the holes already present in the window frame. If there is a sticker or cap on the new handle, take it off it if needed and screw the handle in place. Once the handle is in place it is crucial to verify that it works by turning the handle and ensuring that the lock mechanism is activated.

Espag handles have an extra spindle that is protruding from the handle and slots into a multipoint locking mechanism within the frame of the window. Cadenza windows feature a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and are hung over the outer frame of the window or the transom crossmember of the bar.

Once you have the new handle in place, slide the spindle inside the lock in the window and then tighten it down. Replace the snap-in cover and screw cap (if necessary) after the handle has been firmly fixed. When the handle is in use, you can open and close the window a few times to make sure that it functions correctly and securely.

How do I fit the new handle?

It's not that difficult to change the handle on your windows made of uPVC. The process is easy. All you need is a screwdriver and a small amount of patience. First, ensure that the old handle is unlocked. Then remove any screws visible. You could also replace them with screw caps. After removing the handle, you will need to note the length of the spindle that extends from the back. This is important because it will determine the kind of handle to buy.

Espagnolette handles are the most popular type of handle for uPVC windows. They feature a spindle that is connected to the handle and operates an internal locking mechanism within the frame of the window. The handle opens the latch, allowing the window to open. In regular use and time, espagnolette handles may be damaged.

Cadenza handles are a second type of uPVC window handle, which is typically used on tilt and turn windows. They have a protruding knife that is operated by a multi-point locking mechanism inside the window. They are more secure than espagnolette handles since they only open from the inside. They can be replaced by the same procedure as espagnolette handles however you should ensure that the new handle has an angled blade instead of one that is flat.

Once you have decided on the right handle to purchase then you can place the new handle to the existing screw holes, and then screw it in the appropriate position. You should then put the screw covers back on and verify that your new handle is operating correctly. You can do this by moving the handle back and forth from the locked position to the unlocked several times. If you have any issues, it might be worth contacting a specialist to see if they are able to help resolve the problem. They can advise you on how to solve the issue in a quick and effective manner.