10 Things We All Love About Repairs To Upvc Windows
Repairs to uPVC Windows
uPVC windows are a fantastic option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not get rusty or decay.
It is important to clean and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and also improve the efficiency of energy.
1. Broken Glass
The damaged glass in your windows could cause severe damage to your home and may even be fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good repair.
Single-pane windows are relatively easy to replace, and they typically fit into frames that were previously in use very easily. If you have double glazed window repairs-paned windows that are joined by internal beading, it will be difficult to remove and replace the old panes. In this case you'll need source some plastic spacers that will aid the new pane in being able to fit correctly into the frame of the window.
If you plan to attempt to remove the window panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and protective eyewear. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric and not onto the floor which could cause them to be trampled.
It's a great idea cover the gap with tape after the glass is removed. This will keep drafts and water from entering your property until a professional comes out to repair the window. It also acts as an obstruction to prevent criminals from getting into your home. If the gap is particularly large, you might be interested in a security door that has an integrated window, since it will provide the best of both worlds.
2. Sagging
Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber sash windows. However, over time they can suffer from a variety of issues like sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. It is crucial to act immediately if you notice your uPVC windows are sliding.
To fix a sagging window you can try repositioning the hinges. You'll first need to open the windows to get at the frame. Then, you can remove the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and verify the an appropriate fit. If you are happy with the size of the window, you can tighten screws to keep them in the right position.
If you aren't able to move the hinges you may need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes them to lose tightness. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and draught-proof.
uPVC handles may also loosen. Often it is due to screws that have come loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to shut the window and do a test fitting. The corner joints of the sash must align with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.
3. Water Leaks
It is crucial to take action if you wake up every morning to find a smoky wall and floors that are wet. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or is missing.
It is a fairly easy fix that can be done by any skilled DIYer. Depending on the severity of the issue is, the old caulking might need to be removed. It is important to remember that when it is about upvc window repairs, click hyperlink,, you should not be tempted to 'over-caulk and then make the area more difficult to clean and could reduce your energy efficiency.
Check that any drainage holes do not have debris in them, and also ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you might need to consider replacing the window.
Other indicators of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can quickly spread throughout the home.
It is also important to remember that if the leakage originates from the glass of your double glazed window repairs glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. It is also possible to be repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or loose and blow open with a breeze, it may be hinges at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.
Like all mechanical parts hinges are prone to wear out over time. It is very easy to replace a hinge on a window but it's much easier if someone else helps you hold the frame.
Verify that the upvc window repair hinges are open and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.
Faulty window hinges could be caused by improperly opening the window a certain way or by inadequate installation at the factory. It is usually possible to fix the issue by sending us a picture through our website and we will be more than happy to give you suggestions.
It is also crucial to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is an ideal way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window repairs near me operate and close more smoothly. It can also stop corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.
5. Draughts
Draughts in windows made of upvc can be caused by various factors. First, the hinges because of wear and tear, may become displaced, which causes gaps to develop between the sash and the frame. If they're beyond repair, it might be necessary to have them realigned. Secondly the interlock, this is on the hinge side of the window, can also be misaligned, and again it's possible to just give them a thorough clean, however in some instances it could be necessary to have these replaced.
The next common cause of draughts is the window seals. These can become worn down or damaged over time, and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures and decrease the possibility of draughts.
Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They will help keep cold air out and keep your home warm and cozy!
With a little regular maintenance and repair your windows made of upvc will continue to provide excellent insulation and security for your home. It is important to remember that all windows will eventually wear out and it could be cheaper to replace them rather than repair them. If you encounter any issues with your upvc window, it's best to consult a professional as soon as possible.