Five Killer Quora Answers On Sash Lock Door Handles
sash lock door handles (why not find out more)
If you want to enhance the security of your home without compromising the aesthetics, choose sash lock door handles. They are used in conjunction with mortice latches or replacement sash windows lock and can be combined with a night latch to provide additional locking for internal doors.
The handles consist of a lever/handle mounted on a backplate and are generally used with a three or five lever mortice lock. They can be combined with a tube latch.
Lever Lock Handles
There are many types of lever handles that will fit any decor. The rustic lever locks are very popular in both modern and farmhouse-style homes. Classic lever handles are round or spherical, and are easy to hold. They are easy to use, inexpensive, and suitable for any style of home decor. For a stylish look, opt for polished chrome or a satin nickel handle. These finishes are sturdy and easy to clean. Antique bronze and polished brass are also alternatives. Many handles have a decorative design, such as small amber worm eyes, or long-horned crystals. Some levers feature a pin, star or any other design molded into the bottom.
To change your lever lock door handles, first make sure you have the correct screwdriver or a tool to disassemble them. Based on the design and model, you may need to use an awl or nail to remove the lever handle. Some lever handles feature an apex or notch on the opposite side of the base which can be used to break it open.
Follow the manufacturer's directions to remove your old handles when you have the right tool. Check the spindle of your new lever. Doors that are in use could have been morticed to accommodate locks and latches in the past, which requires a specific spindle. Most lever handle manufacturers use a standard door handle spindle.
If you are replacing a sash lock door handle the old handle should be removed, and the tubular latch bolt, that is located within the door, needs to be disconnected from the strike plate in the door frame. The latch bolt will need to be inserted into a hole in the frame of the door and then connected to the strike plate.
When installing a new lever door handle it is crucial to remember that all ADA (Americans with Disabilities Act) compatible handles are designed to be operated with a hand and must not require users to tightly grip or twist their wrists. In order to comply with ADA standards of compliance the lever door handle must be operated using only the thumb and finger or the entire hand.
Sash Lock Handles
The primary function of sash locks is to seal the door by pulling the sashes moving tightly together. This helps to keep the temperature of the house and also prevents drafts. These locks are great for doors that do not require for a keyed lock.
Mortice sashlocks are sash windows repair locks that incorporate a deadbolt and latch into one case. They are inserted into the door's material. They work with door handles and are available in a variety of different options to choose from to suit your home.
The lever handles for locking is operated by a lever with an opening cut into the backplate below. This permits a key to be to be inserted into the mortice sash to turn it. This lock is typically used on doors that do not lock, like those in dining and living rooms. However, it can also be used with a tubular lock to create the security of the door.
They are designed to hold the sash in place at various points, and include hooks that fit inside the keeper. They come in various styles and designs to fit into various window types, such as sliding or hinged casement windows. Some are made from cast aluminium while others are brass or wrought iron. These are available in various finishes to match the other elements of door furniture like escutcheons to secure the keyhole.
The 3 lever sash locks are only suitable for internal doors. They do not provide the security required by insurance companies. They are also less vulnerable to forced entry than their 5 lever counterparts, which makes them more vulnerable to attack.
A door sash lock that has 5 levers is a much better option for external doors because it provides higher levels of protection against forced entry and is harder to bypass or pick. The locks are a revolutionary design that has been tested and certified for compliance with stringent building, fire and disability regulations.
The first step in replacing a sash window lock handle is to remove the old fastener, by removing the screws from both ends. Make sure you have a screwdriver available and take care to separate the components so as not to damage them. Mark the screw holes using pencil to align the new fastener properly when you are ready to install it. Clean up any dust or flickers of paint and then screw the new fastener into place. Test the handle to ensure it functions properly and creates an airtight seal.
Tubular Latch Handles
The tubular latch is an internal latch that can be operated by turning the handle. It is designed to latch the door shut however it does not lock the door like mortice locks do. They are used most often on doors that are internal, and where locking is not necessary. They can be fitted either with knob or lever handles.
Tubular latches are available in a variety of sizes. The sizes vary from economy to the high-end architectural. The size you select will depend on the use of the door and whether you require the function of a lock. If you require a thumbturn release mechanism for an emergency, you need a lockable latch.
Choosing the right latch also depends on the backset dimension of your door. This is the distance between the edge of your door and the centre of the hole for the door handle knob or rose, and you will need to select a latch with the same backset measurement. This will ensure that the door handle and knobs will operate the latch smoothly.
If you are fitting an unsprung or sprung lever or door knob, it is essential to choose a durable tubular latch with a double sprung follower and tongue. This will provide a smooth operation for the latch and keep it from becoming sluggish and unresponsive with regular use.
The next step is to install the latch on the door. The first step is to ensure that the latch is leveled to the top of the door frame or casing. Note the location of the latch and drill holes. Countersink drill bits aid in creating the right recess so that it can fit comfortably.
Once the latch is installed, you can install it into the door. Before installing your locks or handles it is crucial to ensure that the latch is functioning properly. To do this you need to open and close the door a few times. If it's not functioning properly, try lubricating it with WD40 before trying it. If you are still experiencing problems, it might be necessary to speak with an expert locksmith or installer.
Keyhole Handles
Keyhole handles are fitted with a tubular latch installed in the door. This latch is used to open and close the door. When the handle is pushed down, the handle engages the latch and when pulled up, it releases it, allowing the door to be opened. These kinds of handles are typically used on internal doors like living rooms and doors for dining rooms, but they can also be fitted to front doors if they are paired with the nightlatch.
Door knobs are a contemporary type of handle that incorporates a sprung lever/handle on a square or round fixing rose that has a matching thumb turn or escutcheon. They come in a variety of designs and finishes that will fit the doors in your home. They can be used with Euro cylinder locks or multipoint locking systems to add additional security to the door. This is achieved by locking the door at various points along the height of the door. Door handles that are compatible with the lock are required with the correct lock center dimension to accommodate the barrel.
Keyhole escutcheons are an escutcheon that covers the door's key hole to conceal it from view and give a more stylish look to the handle. They are available as a pop-on or screw-on design and are available in a variety of designs to match your door handle. Additionally, a recessive escutcheon can be affixed to the door's edge to conceal the keyhole and give it a more modern look.
Some of the handles are compatible with Euro-cylinder locks. These handles are suitable to secure uPVC doors and require handles that have the Euro cylinder hole as well as screw holes in the backplate. These handles also require an Euro Cylinder escutcheon, or a standard escutcheon based on the use.
If you decide to use mortice lock or a sash lock, or a tubular latch for your door, it's essential to understand the different features of each and the requirements they require to be compatible with the other components of your uPVC door system. You'll need to think about the door thickness, door hinges and frame reinforcements, as well as the door handle backplate size, the dimensions of the lock centre and the screw centres for the cylinder.