Fitting A Cat Flap In A UPVC Door
Allowing your cat to leave and enter the house whenever it wants is an excellent method to keep your pet physically active and mentally stimulated. A flap can aid in reducing accidents due to toilets by making it easier for your cat to leave the house when it is required to.
Take a measurement of the door
A cat flap allows your pet to leave and come back whenever they want without you having to open the door. This makes it perfect to keep them inside when you're home or away, and helps keep unwanted pests out of your home too!
You should examine the door's measurements to ensure you get the correct size cat flap. There are various sizes available. This ensures you get the correct size to fit into your door made of upvc otherwise, it could be too small or too large for your cat and he will struggle to use it.
Use a ruler to measure the width at several places along the edges of the door. You should also take measurements of the door's height in a few places. This is because doors that are too high could cause your cat to do an exercise routine like a gymnast every time they need to use the flap!
If you're not sure of how to measure the door, it may be best to seek help from a glazier or someone who is familiar with this kind of work regularly. They will be able determine if your door is suitable for cat flaps and can help you decide on the size of flap to purchase.
After you've gotten your measurements, the next thing to do is to mark out the shape of the hole in the door. This will help you when you cut the hole and save you money!
Make sure you make the hole in the correct location. For example, if you're installing the cat flap inside the patio door, it's important that the hole is not too close to hinges, as this can cause leakage and damage to the seal.
If you have a glass door, it might be best to let this job to a glazier. It isn't easy to fit a cat-flap into an existing pane. It is also possible that it breaks and loses its weatherproof seal.
Measure the Cat
A cat flap lets your pet come and go whenever they want without you having to leave him all by himself. It also helps keep draughts out of your home, which isn't bad for you or your cat!
If you have a uPVC door or composite, it may be difficult to install a cat flap. These kinds of doors are typically made of different materials than traditional wooden or uPVC doors and the process of installing them is different as well. Be sure to check with the manufacturer if the door is compatible before you install a cat flap on your uPVC composite or uPVC door. Changes to the door could invalidate warranties.
Generally speaking, these types of doors are built to be tough and durable with insulation included. They are more resistant to the weather than other kinds of doors, but it can be difficult to install a cat flap. Consult a professional before installing a cat flap onto the uPVC door or composite.
To make sure that your cat can get through the door, you'll need to take a measurement of their height. This will be easiest if they are sleeping or calm, so that they aren't moving around too much. Once you've determined their height, you can measure the distance between their stomach and the floor to determine where the bottom of the cat flap needs to go. This position is marked on the door.
If your upvc door panels cat flap or composite door is made from metal (either steel or aluminium) you'll need to be very careful when cutting it with power tools. Drilling into metal can cause cracks, particularly if the area is made of toughened glass. It is highly recommended to employ an expert glass installer when putting in a cat flap in the pane. This will stop the glass from breaking or becoming brittle. A glazier will also provide you with a circular hole for the flap for your cat. This is less likely to crack and is more secure for your cat to use.
Cut the Hole
A good quality cat flap should come with a drawing template that you can use to mark the spot on your door where the hole will go. If it doesn't, you can make your own using a thin piece of paper (tracing papers are great). Once the shape has been drawn in pencil on the door, then use your spirit level to make sure that the shape is completely horizontal. This will allow the cat flap to properly fit into the door and prevent it from being able to slide open or closed.
Next, employ a jigsaw for cutting out the shape marked on the door. Make use of a blade specifically designed for uPVC door use. It is usually identified with this information. If not then ask the staff at your DIY store for help. Once the hole is made then place the flap against it and open it, making sure that the flap moves easily. If it is bound at any point, you can use a file or a sandpaper to correct this.
It is also important to ensure that there are no electric gas or cable lines within the door you will be cutting through as they could be damaged by the jigsaw. Also, be aware of any handles or other fixtures that are in the door, which will need to be removed in order to install the cat flap. Be careful not to damage these items in the process.
Most people who install a cat flap on their own have a standard solid uPVC front door, meaning they will not have to face these issues. If your door is made of wood or has a decorative piece that isn't easily removed, this will complicate the job.
It is always worth seeking assistance from an expert cat flap fitters near me flap fitter for these kind of jobs since it is crucial to get them done right to avoid potential issues in the future. It is crucial to do it right because getting it wrong could damage the door and invalidate the warranty.
Install the Flap
Once you've made your hole, place the flap to check whether it opens and is able to fit. If you find any points that catch or stick, use a hand file or sandpaper to file them down until they are able to fit and can be opened without issue. Be sure that the flap is aligned with the door.
Some kits come with a template for this however, even if yours does not provide a template, you could make use of fitting a cat flap in a upvc door piece of thin paper instead - something like tracing paper ideally. Place the paper on the door, and draw a line to indicate where the flap should be placed (this will serve as a cutting guide). Draw four screw holes on each corner of the flap using the pencil marks you made on the door. These will be the screw holes will be used to secure the flap to the door.
Most uPVC door are solid and easy to cut. If your door is constructed of composite or GRP however, it could be more difficult. If you're not comfortable with this, it's recommended that you hire an expert. They can also inform you if the door is suitable for installing an animal flap.
If you're planning to install a cat flap in composite doors, it is important to first check with the manufacturer or a professional joiner. Any changes made to these doors could cause the warranty to be void. If you choose to complete the task yourself, remember that it can be messy and possibly dangerous job.
You'll need a grinder or saw to cut through composite doors, rather than only the GRP. This is a risky task, and you'll need to take extra care to ensure that the door is not damaged. It is important to note that it's much more difficult to make holes in door glass than a upvc cat flap door panels door or solid wood doors.