The Ultimate Guide To Fiat Panda Key Fob Replacement

Reasons Your Fiat 500 Key Fob Won't Work

A key fob with the fiat 500 key cover remote key (Recommended Looking at) 500 number is a handy way to open the doors and begin the car. However, there are many reasons the fob could stop functioning. This could be due to a dead coin-battery and water damage, as well as problems with the receiver modules, and interference.

This listing is for an NEW replacement fiat key fob Fiat Flip Key Remote that is similar to the Ilco brand. It has to be professionally programmed (click here to search for local locksmiths in the automotive industry). It includes lock, unlock and trunk buttons.

Dead Coin Battery

A dead battery is probably the most common reason for your 500 key fob not working. Modern key fobs have a restricted operating range, and should be within some feet of the vehicle to operate. If you are far from your vehicle and press the key fob button the car won't respond, and will display a "Key Fob Not Detected" message in the instrument cluster.

If this happens, replace the battery on your coin cell (Part number CR2032) with a new one from a reputable brand like Panasonic, Duracell, or Energizer. You can typically find them in your local hardware store or on the internet.

You can test the battery on your coin-cell by pressing the buttons while standing near your Fiat 500. The parking lights should blink and the key fob should operate the lock and unlock switch.

If your key fob does not work after replacing the battery, it may be water damage which prevents it from communicating with the module inside your vehicle. Water damage can happen in many ways, such as the simple splash or submerging your key cover fiat 500 fob in saltwater at the beach. If you suspect that your fob was exposed to water, you can try placing it in a dry rice bag to draw the moisture out. If this does not work, you'll need to have the fob changed by an auto locksmith or dealer.

Water Damage

Damage to the water supply can occur if you submerge the fob in the ocean or wash it in a machine. Saltwater can cause the circuit board to short and eventually fail. The fob getting wet is not a good idea however, if you drop it into an empty cup of water, or don't remember to take it out of your pocket before you run the washing machine do not give up hope.

First, remove the battery. Before replacing the battery, clean the electronic chip with isopropyl or another similar product. Then test the fob to verify if it is working. If the key doesn't function, it may need to be reset. This is usually handled by an auto locksmith or dealer.

If your key is older and is not programmed for your car You will need to replace it completely. This is a simple process which can be accomplished by a professional locksmith for automotive use. The locksmith will have to cut the key to match the ignition on your vehicle. The locksmith will also have to reprogram the fob into the vehicle's system. It's a simple and inexpensive process that can be completed on the next day.

Receiver Module Issues

The 500 key fob you have may not work because it's out of range. The remote typically has a range of 30 feet or less and if it's far away from your car it won't respond to your commands. It can be solved by moving closer to your vehicle until it starts responding.

If your fob doesn't work after you replace the coin battery, also known as a "button", "watch" or "button", it may be due to a malfunction on the internal circuit board. Reprogramming your fob can resolve this problem. You can find the steps for the majority of vehicles on YouTube or in the owner's guide.

It may be necessary to replace the clips made of metal that hold the coin batteries in their place. If they loose tension, it could prevent your coin battery from sitting properly, causing your remote to malfunction.

In rare instances, the fob can become out of sync with your vehicle because due to hardware or software issues. You can fix this issue by visiting your local dealer or auto-locksmith to reprogram your key fob. In certain situations they might need to reinstall the program in your body control module too.

Interference

Interference can also cause the key fob to be unable to receive or transmit the signal. This could happen when the keyfob's location is in close proximity to a radio transmitter like a cell phone or radar detector. The key fob may not work because of a weak connection to the buttons water damage or damage to the internal chips.

If your key fob suddenly stopped working, or you have tried everything at home to fix it (e.g. battery replacement, reprogramming and using the spare key for fiat 500 key fob, you may have a defective receiver module on your 500. The receiver module, located under the dashboard, is able to pick up radio frequency signals from your key fob. It converts them to electronic commands that the vehicle interprets.

There's a simple method to reset the 500's in-board system, including the keyfob. Disconnect the battery for 15 minutes by removing first the negative cable, then the positive cable. Reconnect the battery. This will get rid of any residual electricity and restart the car's computer system, which can help you the key fob to function again. If the issue continues, you should consult an expert technician. They'll be able to diagnose the exact cause of your issues.